ENTTEC’s OCTO MK2 is a robust and reliable installation grade LED controller engineered to take any architectural, commercial or entertainment project to the next level. With 8 universes of Ethernet-DMX to pixel protocol conversion and network chaining between devices, the OCTO MK2 allows for fast deployment of LED strips and pixel dot systems. The OCTO MK2 is packed with installer-friendly features such as an identify button to check correct wiring, wide input voltage range (5-60VDC) and the flexibility to power it directly from the same source as the LED pixels. All contained within a slim electrically isolated 4 DIN form factor. Furthermore, the newly released OCTO MK2 not only supports more than 20 pre-listed pixel output protocols below but also allows creation of custom pixel protocols (criteria apply, see user manual). All firmware updates and intuitive configuration management are conveniently accessible through its localhost web interface. Features - Two * 4-universe pixel outputs with Data and Clock support. - Supports for up to 8 universes of Art-Net, sACN, KiNet and ESP. - Multiple pixel output protocols supported. - Allows user to create custom pixel output protocols (criteria apply, see user manual). - Easily extendable network - daisy chain ethernet connection through multiple devices. - DHCP or Static IP address support. - Grouping functionality to reduce input channel count. - Surface or TS35 DIN rail mounting option. - Identify/Reset button allows installers to quickly check wiring is correct without requiring a network connection. - Intuitive device configuration and updates through the inbuilt web interface.